The Honey Warmer & Beeswax Melter really is an invaluable and versatile piece of equipment, a must have for every beekeeper.
It will get used more often than a honey extractor for many different jobs throughout the year.
- The 1800W heating element is concealed in the base so there is no contact between the element and the contents of the tank.
- The temperature can be accurately controlled between 30°C - 100°C on the thermostat dial.
- A separate grill base is included to maintain water circulation around containers.
- The 28 litre capacity, 35cm diameter tank is acid proof enamelled and fitted with a drainage tap.
Warning: Honey should never be directly heated because it can quickly start to burn and spoil at high temperatures.
That is the value of this machine - honey in containers (from little jars to 30lb buckets) can be gently warmed from every direction by the indirect heat of the surrounding water.
Separate and extract honey and beeswax from honey crystallised in the comb or from wild honeycomb.
- break up the comb as much as you can to fill 30lb buckets - seal the buckets with lids
- place the grill base in the machine
- place the bucket on the grill base
- fill the machine with water to the depth of the bucket and put the lid on the machine
- start with the thermostat at 40°C for 8-12 hours - this depends on ambient temperature and the honey so experiment to suit your conditions
- giving it a periodic mash and stir - this will help speed it up
- the honey will liquefy, lose viscosity and sink to bottom
- the wax will soften but not melt and will rise to form a layer of sticky wax porridge on top
- allow to settle and cool before skimming the porridge and process this as for cappings detailed below
- strain the honey
Honey that has crystallised in containers can be melted in the same way as 2-5 above.
- honey that has been previously harvested and stored in buckets for bottling at a later date
- honey that has crystallised in the jar
Warning: Beeswax should never be directly heated because it can vaporise and combust at high temperatures.
That is the value of this machine - beeswax can be safely melted in water at a controlled temperature.
Melt and purify beeswax from cappings and comb
- put enough water in the machine so the water level is above the drainage tap
- put the cappings in the water and stir
- start with the thermostat at 70°C - this depends on ambient temperature so experiment to suit your conditions - note that the melting point of beeswax is 63°C
- do not increase the temperature so the water boils under the wax - this is dangerous
- after melting allow to cool
- the solid wax disc will have shrunk so it can be removed
- any insoluble impurities will either have sunk to the bottom of the tank or formed a layer on the underside of the wax
- this layer can be scraped off with a hive tool
- any honey in the cappings will have dissolved in the water so this can be drunk, fed back to the bees or brewed into mead or beer
We hope that our advice is useful but this cannot be a definitive instructional guide - users are responsible for their own health and safety risk assessments.
All Copyright is Reserved and Protected © 1999 - 2019 Heather Bell Honey Bees - Cornwall Beekeeping Supplies - You are agreeing with our Terms & Conditions
of using this information.